CABLE REPLACEMENT :
Industrial XR-to-Industrial XR

A Super Long-range, Intelligent
Wireless Serial Cable

Connect standard serial devices over long distances without using cables, up to 30km!

AIRcable Industrial XR-to-Industrial XR provides a fast, convenient, secure way of connecting any device equipped with a serial port to another serial (RS-232) based devices.

Example uses include:

• SECURE industrial monitoring of piplelines, transmission lines, oilfields, refrigeration, ...
• Remote weather stations
• Remote pump monitoring and switching
• Agricultural monitoring

AIRcable Industrial XR-to-Industrial XR gives you a significant savings over deploying and maintaining physical cables!

The AIRcable Industrial XR-to-Industrial XR package comes with two Industrial XR modules pre-paired and pre-loaded with a cable-replacement BASIC program.

The AIRcable Industrial XR-to-Industrial XR is intelligent & programmable! Learn more >>

This package allows the following configurations:

• Serial-Male to Serial-Female configuration: one that plugs into the serial port of your computer (DTE), and one that plugs into the serial (RS-232) port on your peripheral device (DCE).
  
• Serial-Female to Serial-Female (Null-Modem): two DTE connections, both with SUB-D 9 female plugs. With the null-modem configuration the transmit data and receive data lines are crossed, and the DTE ready and DCE ready lines are crossed.

The AIRcable Industrial XR Wireless Cable modules conform to the industrial standard EIA-232-E for serial data communication and act as transparent pass through devices, i.e. as a RS-232 cable without wires. It provides complete emulation of all RS-232 signals.

The AIRcable Industrial XR does not require any software to establish a Bluetooth connection. There is also no need to change any software on the connected devices. The AIRcable is a true "cable replacement" product. The serial data rate is adjustable between 4800 bps and 115200 bps.

Data rate can be different on both modules, thus providing a baud rate conversion.

Both AIRcable Industrial XR modules can be powered through pin 9 or with the power supply from the external power plug. They have a wide range of input voltage: 5-15V.

Every AIRcable Industrial XR module is now shipped with a free null-modem adapter that is used to convert the male serial plug to a female serial plug and supports power through pin 9.

Features

• Up to 30km range between devices!
• Built in rechargeable battery and charger for complete remote autonomy
• Can be recharged via solar
• Simple and easy plug and play operation
• Pre-configured "matched-pair" of devices
• Plug compatible with your computers serial port
• Fast and secure invisible network connection

Benefits

• Simple procedure to pair
• Requires no setup, special configuration, AT commands or loading of software
• Works with your existing RS232 equipment
• Delivers high-bandwidth, and secure data connection
• Eliminate the clutter and expense of long range cable deployment

Contents

• AIRcable Industrial XR Unit (Qty. 2)
• 110-240v power supply (Qty. 2)
• Null-modem adapter (Qty. 2)

No change of your software is necessary since our devices adjust the baud rate.