CABLE REPLACEMENT :
SERIAL3-to-SERIAL3X

AIRcable Serial3 to Serial3X

Connect standard serial devices without using cables and with even more range and installation options!

AIRcable Serial3-to-Serial3X provides a fast, convenient way of connecting any computer equipped with a serial port to other serial (RS-232) based devices such as laboratory equipment, point-of-sale devices, scanners and printers, without using any cables.

The Serial3X's external antenna adds range and increases installation flexibility. The Serial3X's onboard battery allows it to operate without power from the serial port or an external power supply.

Features

• Simple and easy plug and play operation
• Small, pre-configured "matched-pair" of devices
• Plug compatible with most serial ports on personal computers
• Fast and secure wireless network connection
• 30 foot "room-based" roaming range, more than 50 feet with line of sight

Benefits

• Simple button activation procedure to pair
• Requires no setup, special configuration, AT commands, or loading of software
• Works with your existing RS232 equipment
• Delivers high-bandwidth, and secure data connection
• Eliminates the tangle of cable, allowing the freedom of mobility.

Intelligent and Programmable NEW!

The Serial3 and Serial3X are now intelligent and programmable via the onboard AIRcable OS.

Learn more about the modules:

Serial3 product page

Serail3X product page

Verstile Hardware

The AIRcable Serial3-to-Serial3X package comes with a Serial-Male module, a Serial3X module, and two null-modem adapters.

The Serial3-to-Serial3X package allows the following configurations:

• Serial-Male to Serial-Female configuration: plug one into the serial port of your computer (DTE), and the other plugs into the serial (RS-232) port on your peripheral device (DCE).
• Serial-Female to Serial-Female (Null-Modem): two DTE connections, both with SUB-D 9 female plugs. With the null-modem configuration, the transmit data and receive data lines are crossed, and the DTE ready and DCE ready lines are crossed.

The Serial Wireless Cable modules conform to the industrial standard EIA-232-E for serial data communication and act as transparent pass-through devices, such as an RS-232 cable without the wires. It provides complete emulation of all RS-232 signals.

The AIRcable Serial3 does not require any software to establish a Bluetooth connection. There is also no need to change any software on the connected devices. The AIRcable serial is a true "cable replacement" product. The serial data rate (between 4800 bps and 115200 bps) is adjusted by a simple external switch.

Data rate can be different on both modules, providing a baud rate conversion.

Both AIRcable Serial modules can be powered through the serial connector or with the optional power supply from the external power plug. They have a wide range of input voltage, accepting 5 to15 volts.

Every AIRcable Serial3 module is now shipped with a free null-modem adapter that is used to convert the male serial plug to a female serial plug and supports power through pin 9.

OEM modules are available without plastic cover or without the DB9 connector for TTL level serial signals as a custom order only.