AIRcable Serial5X

$129.00 Ex Tax:
Brand: AIRcable
Product Code: ACC1316
Availability: Out Of Stock

Serial5X - Independent Bluetooth-to-Serial


The AIRcable Serial5X is an intelligent serial-to-Bluetooth interface which eliminates the need for Bluetooth software on the PC and much more...

Build-in rechargeable LiPol battery, external 3dBi, 4inch long antenna for superior range, ships with power cable and plug-in charger.



  • Fully customizeable
  • Control master and slave connections
  • Restrict connectivity to customer devices
  • Security functions
  • Command line interface in BASIC
  • Runs applications in BASIC applicationson the AIRcable OS
  • DTR/DSR supported, DTR can power other devices, 5V, 50mA

With rechargeable battery and external antenna

The AIRcable Serial5X has a rechargeable lithium polymer battery build-in and a range up to 200m with our specifically optimized 4 inch antenna. It comes with a mini charger.


Pre-configured & Ready for Action

The AIRcable Serial5 is our, next-generation serial product, designed for optimizing serial-to-Bluetooth connections. It is much more than just a connection device.

The pre-installed cable replacement application, like other applications used in mobile phones, allows zero-configuration use as "service-slave", allowing incoming serial connections from other Bluetooth devices. Through a human readable command line interface it configures in a secure one-to-one slave or various master modes.

Fully Programmable & Configurable

The AIRcable Serial5X is programmed in BASIC and available for you (the customer) to adapt it to your particular application and needs.

The AIRcable Serial5X runs the latest AIRcable OS Operating System that allows complete customization including automatic and selective connections, configuration of PIN code, authentication, name, terminal lines etc. see programming manual. See the open source project for a snapshot of what has already been developed for the AIRcable OS!

The AIRcable Serial5X has external baud rate switches for 4800 - 115200 baud and a hardware handshake disable switch so it can be used in 3 wire serial connection applications.

The AIRcable Serial5X module has a male type DB9 connector which can be adapted to a female type connector with our included null-modem adapter that supports power-on-pin9.

In addition the module can be set into 5 different modes which allows it to be independent. One of the modes, the "service-slave" mode, allows it to work as a "AIRcable Bluetooth Service" module.

Every AIRcable Serial5X ships with a free null-modem adapter that is used to convert the male serial plug to a female serial plug, a USB-power plug cable and mini charger for 110V

See our applications section to see a real-world applications of the AIRcable Serial5.

Charging the AIRcable Serial5X


The AIRcable Serial5X requires external power (min 5V, max 15V) through the DC jack to charge the battery but can also be charged through pin 9 of the DB9 connector (DC 5-15V). See power plug information.



Copyright © 2012. All rights reserved. Design: