The AIRcable USB5 is the USB part of a wireless USB-to-Serial cable. It presents itself as a virtual COM port to the PC. The USB5 is preprogrammed to automatically make connections to AIRcable Serial devices.
It runs all the Bluetooth connection software on the module and can be configured for any use. There is no Bluetooth software required that must be installed on the PC.
The AIRcable USB5 is programmed in BASIC and available for you (the customer) to adapt it to your particular application and needs.
The AIRcable USB5 runs the latest AIRcable Operating System that allows complete customization including baud rate, automatic and selective connections, configuration of PIN code, authentication, name, terminal lines etc. See programming manual. See the open source project for a snapshot of what has already been developed for the AIRcable OS!
This product will help integrators to save big on support costs. It automatically makes Bluetooth connections to medical devices, GPS receivers, bar code scanners, credit card readers, and more.
The module comes pre-configured to automatically connect to other AIRcable modules which allows customers to very easily create serial-to-USB wireless cable replacements without configuration using the AIRcable Serial5.
Furthermore the AIRcable Serial-USB™ can be configured in any modes all our AIRcable products support, such as 1:1 or 1:many or many:1 type of connections, meaning you can change the Serial5 side without reconfigure the USB5.