AIRcable LogoSupportServer XRIndustrialIndustrialIndustrialSerialCable ReplacementUSBIndustrialHiFi HeadphonesNextelLegacy ProductsDownloadsSupport Form

View CartCheckout

View CartCheckout
Request a Quote

CompanyProductsTechnologiesSupportOEMsContact Us

SUPPORT : AIRcable Industrial XR

The AIRcable Industrial XR is a rugged and intelligent Bluetooth connection product for autonomous data communications. This new generation of AIRcable devices are enclosed in an aluminum case (weather-proof versions also available). It has a large rechargeable LiIion battery and a wide range charger for wired and solar power.


Support Documentation

AIRmotes Firmware

Industrial Component Documentation

AIRcable Open Source Project

Technical Specifications

Industrial strength aluminum case
- small size: 83mm x 65mm x 23mm
- case mounting flanges
- water proof available for some models
- Industrial operating temperature range -40ºC …85ºC
Power supply
- rechargeable Lithium-ion battery, 1000mAh
- high efficient wide range switching power supply, 4-14V
- 12V, 3-5W solar panel
Real time clock
- calendar functions
- interrupt programmable
- battery backup
Temperature sensor
- environmental data
Bluetooth with external
antenna connector
- omni-directional antenna 35m to 700m
- directional antenna up to 3km
- external cable available
Bluetooth profiles
- master and slave modes
- SPP for streaming data
- OBEX/FTP for file transfer of BASIC, config and file system
- OBEX/PIM item transfer for messages
- up to 4 multiple connections at the same time
RS232
- 1200-230400 bps, 8 bit, none-odd-even parity, 1 or 2 stop bits
- DTR, DSR freely accessible
- automatic hardware handshake recognition
- power control
File system
- 48kByte available for files
- up to 4 files
- access from BASIC program
- FTP downloadable over air
BASIC Interpreter
- 510 lines of BASIC program, 32 bytes long
- embedded functions
- interrupt routines for clock, messages, Bluetooth events etc.
- string operation functions
Certifications

- Bluetooth certified (BQB)
- Bluetooth 2.0 compatible with 802.11b tolerance
- CE certification (pdf)

Radio

- raw output power: 6dBm
- input sensitivity: -85dBm
- omni directional antennas: 5.5dBi, outdoor: 8dBi, 15dBi
- directional: 18dBi and 24dBi
- antenna connector: RP-SMA

NOTE: If you are using the AIRcable Industrial XR outside the USA, please check with your country and local output power regulations.

1-Wire Sensor Interface

- Interface to 1-Wire sensor network using the iButtonLink
Features of basic link, LinkTH and THMon Software

 
 
company info | products | technologies | support | applications | contact us | site map
© 2005 Wireless Cables Inc. All Rights Reserved. Wireless Cables, Inc., Santa Cruz, California, U.S.A.
privacy policy | terms of use | site design by macdonald design, inc.