 |
 |
 |
 |
                  
|
     
 |
|
 |
 |
 SUPPORT : SERIAL
AIRcable Serial is a Bluetooth to serial adapter with a male type DB9 connector in a DCE type configuration. It allows
connections to other Bluetooth devices such as cell phones, PDA or PCs. It also can be used in combination with our other AIRcable products to make a "serial Wireless Cable" or a "serial-to-USB
Wireless Cable. It supports all hardware handshake lines (RTS/CTS, DTR/DSR, and DCD). Pin 9 (RI) can be used to provide power to the AIRcable.
Support Documentation
Technical Specifications
| General Ratio Carrier frequency: |
2.4 ~ 2.483 GHz, 79 channels |
| 1 Mbps Ratio Performance Receiver: |
> -86 dBm sensitivity |
| Transmission power: |
+7.5 dBm |
| Range: |
Class 1 device - 20 meters |
| Antenna: |
Integrated high gain chip antenna |
| Dimensions |
56 x 37x 16 mm |
| Weight |
16g |
| Operating temperature |
0C ~ +65C |
| Power consumption: |
40 mA |
| |
Power supply 5-15 V for serial module with wall adapter or through pin 9 |
| Power plug: |
1.3mm, see here: PowerPlug |
| |
Serial data rate switchable between 4800 and 115200 bps; manually configurable down to 1200 baud |
| |
8 data bits; none, even or odd parity;
one or two stop bits manually configurable |
| |
hardware handshake (CTS, RTS) configurable per external switch |
| |
Supports all modem control signals (DTR, DSR, DCD) |
| |
9-pin D-Sub connector, female or male |
| |
Data Terminal Endpoint and Data Terminal Equipment versions available |
| |
Bluetooth 1.1 compliant |
| Implements & supports Bluetooth profiles: |
SPP, DUN, LAN and OBEX |
| |
Supports master and slave operation |
| |
support one-to-one, one-to-many and many-to-one type of connections |
| |
Automatic and manual connection modes |
|
|
 |
|
 |
|
 |
 |
 |
 |