SUPPORT : AIRcable Industrial XR
The AIRcable Industrial XR is a rugged and intelligent Bluetooth connection product for autonomous data communications. This new generation of AIRcable devices are enclosed in an aluminum case (weather-proof versions also available). It has a large rechargeable LiIion battery and a wide range charger for wired and solar power.
Support Documentation
AIRmotes Firmware
Industrial Component Documentation
AIRcable Open Source Project
Technical Specifications
| Industrial strength aluminum case |
- small size: 83mm x 65mm x 23mm - case mounting flanges - water proof available for some models - Industrial operating temperature range -40ºC …85ºC |
| Power supply |
- rechargeable Lithium-ion battery, 1000mAh - high efficient wide range switching power supply, 4-14V - 12V, 3-5W solar panel |
| Real time clock |
- calendar functions - interrupt programmable - battery backup |
| Temperature sensor |
- environmental data |
| Bluetooth with external antenna connector |
- omni-directional antenna 35m to 700m - directional antenna up to 3km - external cable available |
| Bluetooth profiles |
- master and slave modes - SPP for streaming data - OBEX/FTP for file transfer of BASIC, config and file system - OBEX/PIM item transfer for messages - up to 4 multiple connections at the same time |
| RS232 |
- 1200-230400 bps, 8 bit, none-odd-even parity, 1 or 2 stop bits - DTR, DSR freely accessible - automatic hardware handshake recognition - power control |
| File system |
- 48kByte available for files - up to 4 files - access from BASIC program - FTP downloadable over air |
| BASIC Interpreter |
- 510 lines of BASIC program, 32 bytes long - embedded functions - interrupt routines for clock, messages, Bluetooth events etc. - string operation functions |
| Certifications |
- Bluetooth certified (BQB) |
| Radio |
- raw output power: 6dBm NOTE: If you are using the AIRcable Industrial XR outside the USA, please check with your country and local output power regulations. |
| 1-Wire Sensor Interface |
- Interface to 1-Wire sensor network using the iButtonLink |