SUPPORT : LEGACY USB (old)

The AIRcable USB is an Bluetooth Serial adapter with a serial-to-USB interface. It is not a Bluetooth dongle. Our AIRcable USB runs all the connection software in firmware. No software on the PC is required to make Bluetooth connections. The hardware handshake as well other settings are now configurable through the command line interface.

Support Documentation

• Quickstart Guide
• AIRcable USB (old) - CellConnect USB
• AIRcable for Palm and Clie
• AIRcable CellConnect for Laptops

Technical Specifications

General Ratio Carrier frequency:	2.4 ~ 2.483 GHz, 79 channels
1 Mbps Ratio Performance Receiver:	-85 dBm sensitivity
Transmission power:	+6 dBm
Range:	Class 2 device - 10 meters
Antenna:	Integrated PCB antenna
Dimensions	62x 31x 11 mm
Weight	14g
Operating temperature	0C ~ +65C
Power consumption:	90 mA
	USB bus powered
	Serial data rate fixed 115200 bps, software configurable
	hardware handshake software configurable (CTS, RTS)
	Supports all modem control signals (DTR, DSR, DCD)
	Bluetooth 1.1 compliant
Implements and/or supports Bluetooth profiles:	SPP, DUN, LAN and OBEX
	Supports master and slave operation
	Automatic and manual connection modes