SUPPORT : Nextel

The AIRcable for Nextel™ is a Bluetooth(R) accessory for data applications on Nextel phones. It adds Bluetooth functionality to many Nextel phones without the need of changing the phone's firmware.

Support Documentation

• Quickstart Guide
• Manual (pdf)
• Command Line Interface
• Manual Command Line Interface Application
• Configuration Utility
• Cable-mode Pairing Process
• Support Forum

Technical Specifications

	Embedded fully qualified Bluetooth 1.1 radio
	Industrial standard EIA-232-E for serial data communication
	Hardware handshake (RTS/CTS)
Full support of all modem control signals	(DCD, DTR, DSR, RI)
Radio Carrier frequency:	2.4 ~ 2.483 GHz, 79 channels
Data rate	115200 bps
Transmitter Power at Antenna port:	Class II - 10 meters range
Antenna:	Integrated PCB antenna
Operating temperature	0C ~ +65C
Power consumption:	20mA during communication
Receiver
Sensitivity at 0.1% BER:	-83Bm
Maximum received signal at 0.1% BER:	-0.5 dBm
C/I Co-channel:	9dB
Adjacent channel selectivity C/I 1MHz:	-2.0 dB
2nd adjacent channel selectivity C/I 2MHz:	-34 dB
3rd adjacent channel selectivity C/I >= 3MHz:	-43 dB
Image rejection C/I:	-12 dB
Maximum level of Intermodulation Interferes:	-30 dBm
Maximum level of GSM signal at 1.8GHz:	-7 dBm
Maximum level of W-CDMA signal at 1.8GHz:	-9.5 dBm
Maximum level of W-CDMA signal at 2.2GHz:	-11 dBm
Transmitter
Maximum RF transmit power	1dBm at Bluetooth frequency
RF power control range:	30 dB
RF power range control resolution:	2.0 dB
20 dB bandwidth for modulated carrier:	900 kHz
2nd adjacent channel transmit power:	-52 dBm
3rd adjacent channel transmit power:	-57 dBm