PRODUCTS : AIRcable USB3™

AIRcable USB3™ NEW!

Bluetooth via USB without Bluetooth software.

• Automatic
  Automatic Bluetooth connectivity without the need for Bluetooth software.
• Easy
  Easily makes Serial-USB Bluetooth conections
• Versatile
  Talks to any standard Bluetooth device
• Bluetooth 2.0
  Robust, interference-resistant connections
• Intelligent
  Programmable in BASIC

The AIRcable USB3™ is our next-generation USB-to-Bluetooth module. It runs all the Bluetooth connection software on the module and presents only a virtual COM port to the PC. There is no Bluetooth software required that must be installed on the PC.

This product will help integrators to save big on support costs. It automatically makes Bluetooth connections to medical devices, GPS receivers, bar code scanners, credit card readers, and more.

Pre-configured for Instant Action!

The module comes preconfigured to automatically connect to other AIRcable modules which allows customers to very easily create serial-to-USB wireless cable replacements without configuration.

Furthermore the AIRcable Serial-USB™ can be configured in any modes all our AIRcable products support, such as 1:1 or 1:many or many:1 type of connections.

It can be used to Bluetooth-enable your USB-equipped laptop to connect to your Bluetooth-enabled cell phone.

It also allows Palm devices to sync with a PC wirelessly without the Bluetooth software hassle on the PC.

Fully Programmable & Configurable!

The AIRcable USB3 is programmed in BASIC and available for you (the customer) to adapt it to your particular application and needs.

The AIRcable USB3 runs the latest AIRcable OS Operating System that allows complete customization including automatic and selective connections, configuration of PIN code, authentication, name, terminal lines etc. see programming manual. See the open source project for a snapshot of what has already been developed for the AIRcable OS!